This project was an assignment by Sveaskog and Svenska Skogsplantor. The purpose was to study the effect of protective fabric on the thawing stage of frozen pine seedlings. The function of the protective fabric is that it should protect the seedlings against strong sunlight and create an even temperature inside the boxes containing the seedlings. The result has shown that there was no statistically significant difference when the protective fabric was used or when it was not used, although this was probably due to the weather conditions. The study was carried out under cold and cloudy weather conditions and probably would have given other results if there had been more sunny days with a higher ambient temperature.

This thesis is   focused on identifying and documenting all   electrical equipment, such as devices, power lines / cables, and connectors in the facility and also on presenting a brief   technical description and information of the systems around the reactors.   Furthermore there will be a brief description of LabVIEW - which is a   graphical programming language- and which devices / elements   are programmed. For further notification, I am not   responsible for the programming of the devices in LabVIEW   which I have only used as a tool in my work. The plant   for production of biogas consists of four reactors   of which the third reactor (Lakbädden)   is connected to another reactor (UASB)   where they cooperate with each other.   The reactors are used for producing   biogas in the form of methane gas.The reactors I and II are   connected to, various electrical devices as, flow meters, temperature   sensors, frequency converter and   more.

When going through a stem cell transplantation a patient is forced to undergo protective isolation to inhibit risk of opportunistic infections related to the low leucocyte count as a result of aggressive pre-transplant chemotherapy treatment. Protective isolation has shown to have an impact on patient experiences during treatment and the aim of this study is to elucidate experiences of protective isolation of patients undergoing hematopoietic stem cell transplantation and to deduce patient perceptions of the role of nurses in protective isolation care. The presented study was performed as a mixed qualitative and quantitative survey at a hematopoietic ward in Sweden. Results were analyzed by Mayring (2000) and by descriptive frequency charts and show that patients in protective isolation experience alienation, necessity, safety and anxiety with regards to their protective situation. Considering the role of nurses patients perceive their role to be attendant, informant and acting as an executioner of medical implementations.

In the field of IT-forensics you may often get to analyze different types of digital devices. One ofthese devices is the GPS navigation system. Nowadays GPS technology is getting more and morepopular and is included more frequently in different types of devices. With this article we want topresent the differenent obstacles and possibilites that a forensic investigator is presented with in thistype of investigation. We will be comparing different software suites and make use of forensic toolssuch as EnCase.The reader should get some understanding of the methods there are for analyzing one of these devicesand what problems that may occur in the investigation process.The article presents how the investigator can use different methods to gain information such as recentroutes, favourite destinations and other information that may be stored on the device.

In the field of IT-forensics you may often get to analyze different types of digital devices. One ofthese devices is the GPS navigation system. Nowadays GPS technology is getting more and morepopular and is included more frequently in different types of devices. With this article we want topresent the differenent obstacles and possibilites that a forensic investigator is presented with in thistype of investigation. We will be comparing different software suites and make use of forensic toolssuch as EnCase.The reader should get some understanding of the methods there are for analyzing one of these devicesand what problems that may occur in the investigation process.The article presents how the investigator can use different methods to gain information such as recentroutes, favourite destinations and other information that may be stored on the device.

Plant Protection Products (PPP) used in the horticulture industry can be both chemical and biological. They are used for weeds (herbicides), insects (insecticides), and fungi (fungicides) and as growth retarders.Many horticulture workers get in touch with plants, treated with PPPs and many of these don?t use any protective equipment.The aim of this project is to illustrate the work environment hazards for staff working with greenhouse pot plants, after they have been sprayed.The method used was observations of the operations for packing plants. I studied the operations and took notes of how operations were performed and what protective equipment they used. I also took photos and asked questions.A literature study completed the observations.

Take your phone out from your pocket and look at it. Chances are that a certain California-based company made it; in 2013, it was quite likely. If you flip it over and remove the shell you have added (or look through the protective film), you might also learn that it was assembled in China. Flip it over again and look at the picture of something or someone you find great affection for, protected by yet another thin film. While who made it and who assembled it might vary, and it does not matter from now on, the other parts about protective barriers and personalization might be more accurate.

In the field of IT-forensics you may often get to analyze different types of digital devices. One ofthese devices is the GPS navigation system. Nowadays GPS technology is getting more and morepopular and is included more frequently in different types of devices. With this article we want topresent the differenent obstacles and possibilites that a forensic investigator is presented with in thistype of investigation. We will be comparing different software suites and make use of forensic toolssuch as EnCase.The reader should get some understanding of the methods there are for analyzing one of these devicesand what problems that may occur in the investigation process.The article presents how the investigator can use different methods to gain information such as recentroutes, favourite destinations and other information that may be stored on the device.

ESAB is a world leader in production of welding consumables and equipment. The company manufactures, among other things, welding electrodes. A roller straightening unit is used in the cutting process to straighten the wire, which the welding electrode consists of, by adjusting some of the rollers during operation. According to ESAB?s standard and the European machinery directives, moving parts of machinery, such as rollers of the roller straightening unit, must be out of the operator?s reach.

ESAB is a world leader in production of welding consumables and equipment. The company manufactures, among other things, welding electrodes. A roller straightening unit is used in the cutting process to straighten the wire, which the welding electrode consists of, by adjusting some of the rollers during operation. According to ESAB?s standard and the European machinery directives, moving parts of machinery, such as rollers of the roller straightening unit, must be out of the operator?s reach.

Mobile devices such as tablets and smartphones are quite common in this day. The author of this thesis wanted to know how common these mobile devices are in the building industry and how they are used and what potential an app could have. The author thus conducted an investigation on this matter, mainly in the form of interviews.Answers given by the interviews were then used as a basis to survey the usage of mobile devices and the usage of different kinds of apps. An investigation of different apps with the potential to be used by professionals in the building industry has been carried through. Apps which manage such things as scanning documents, measuring distances and handle communication.

The use of mobile devices has increased dramatically in recent years and the development of newtechnologies has made it difficult for developers to know what screen size and device the visitor isusing. This has resulted in the fact that today there is a problem with the interface for web pages onmobile devices. They are not adapted to the flexibility required for the interfaces to be recognizedon various mobile devices. Instead of developing two separate web pages, where one is designed formobile devices and one for desktop and keep them both continously updated, responsive webdesign simplifies the work process. Responsive web design is a flexible and dynamic interface thatadapts to mobile device and screen sizes.

The last couple of years the use of mobile devices such as mobile phones and PDAs has increased tremendously. Most of the these devices have their own protocols for synchronising data and this has given rise to a need for a standard synchronisation protocol, SyncML. This thesis compares this protocol against the existing ones. The comparison shows that the preferred choice is SyncML. Also an application using SyncML has been developed.

To be able to feel a sense of belonging, people need to have the possibility to take part of the information from the society. Hearing-impaired don?t have the same possibility as hearing people when they want to take part of the information, therefore they don?t get the same benefit. This contributes to a feeling of not belonging and a sense of limitation in different social occasions. Therefore the society needs to be accessible to everyone regardless disability.

Today?s society is very focused around technology and something that is very popular is the usage of mobile devices such as Smartphones or Tablet computers. One of the reasons why these devices are so popular, is because of the large amounts of services or ?apps? that they can provide for the user. They can do a lot of things that makes everyday living easier for the users.The focus of this study is to find out what kinds of mobile services the users of these devices are expecting and/or wishes to see in the future and what is required to be able to develop and use these services in a good way.We started of the study by searching for earlier studies on the same or similar subjects.